ProStrip DB2 No Solder LED Strip | 24V 9w Warm White 3000K (Per Metre)

  • Sale
  • Regular price £10.50 ex. VAT

GET ANY OF OUR LED STRIPS HALF PRICE! 50% OFF LED strip purchased with LED profile*
*Discount applied at checkout. Online only, excludes bespoke and clearance.

Quicker, easier, better.

A revolution in solderless LED strip design - ProStrip DB2 has been created with you, the user, in mind. The on-board connectors allow you to connect LED strip without soldering or connection systems. Just strip the connecting cable, twist the wire and push into the on board connector on the LED tape! 

Corners made easy

Corners are no longer a problem - it doesn't matter whether the strip is mounted flat or vertically, just mount the strip on the walls, align the edges near the corner and make the corner joint using 2 pieces of solid core wire which are easily pushed into the connectors. This produces a neat and simple finish with no twisting or bending of the LED Strip.

Simple power input

The offset LED's mean that the cables don't interfere with the light or, alternatively, you can choose to introduce power anywhere along the length of the strip - it really is that easy.

Efficient maintenance

In the unlikely event of a problem with an installation, then ProStrip DB2 is easier and quicker to repair. There's no need to remove the whole length, just cut out the affected section, add a new piece in the gap and then reconnect the power using simple wire links. The on board connectors mean it is a few minutes work and there is no need to disturb the rest of the length saving you time and money.

Commercial grade

The basic strengths of the ProStrip range remain - that is a heavy duty PCB for optimised thermal control and a generous 10m single run length as well as the excellent 3M VHB (very high bond) adhesive tape to provide the complete package. Reliability and long term performance are guaranteed with a lumen maintenance figure of > 96% after 6000 hours of use.

Recommended Cables

The onboard connectors are easiest to use with a solid core cable - it is possible to use a 0.5mm or 0.75mm stranded cable but please ensure the cable ends are well twisted and there are no free strands which might cause a short circuit.






Ask a Question


Ask a Question
  • Hi I want to check before cutting the strip to length, there are cutting lines every 50mm but the line I want to cut at to fit inside my profile has 2 soldered blips across it. Is it still OK to cut the tape at this line? Thanks Matt

    Hi, yes you can indeed. The soldered joins are suitable for cutting through, just aim for the centre of the join.