What do you need to make a complete Adjustable White LED Strip System?
To create a fully working Adjustabale White or CCT LED Strip system, you will need to add some form of control system to the usual LED Strip and Power Supply. This control mixes the power between the warm and cool white chips on the LED Strip to give you the exact colour temperature that you require.
LED Strip. Obvious really. These LED Strips are made with 2 different colour temperature LEDs which are then mixed together to provide the colour you want - just like mixing paint.
Power Supply (Essential). You can choose a regular 24v Power Supply in which case you will also need an Interface which is connected between the Power Supply and the LED Strip - if you are using less than 7m of LED Strip in a single run, then you will find the PowerSmart more convenient as it is a Power Supply with a built in Interface.
Interface (Essential) These are connected inline between the Power Supply and the LED Strip. If you choose the PowerSmart they are NOT required.
Control (Essential) Used to physically control the on/off, dimming and the exact Colour. Works with both Halo Interfaces and PowerSmart.
Cables (Essential) You will need a 3 Core cable to connect up your system. We recommend a 20 AWG wire as it's easy to use and has a decent current capacity.
A 2m long JST Style cable which can be cut to form male and female cable which can be easily clipped and unclipped.
GRIPPA Solder Free Connectors
Get customer attention by clean visual and video