Easy to use solder free LED strip connectors suitable for use with 10mm wide, Splashproof IP65-rated LED strip. Use these to connect your TuffStrip2 LED strip to cables to create corners and bridge gaps.
GRIPPA connectors can carry a max current of 6A and they produce a strong and reliable joint which will not fall apart in use.
For best results we recommend using a 0.5mm or 20 AWG stranded cable (see link below) and secure to the mounting surface using our adhesive mounting clips (SA-MC) - this will prevent the weight of the cable and connector pulling the strip aways from the surface over time.
PLEASE NOTE:
- These connectors to not fit inside all of our LED profiles, only those with an internal width greater than 12.5mm.
- Suitable for 10mm wide, IP65 rated TuffStrip2 & Splashproof TradeStrip60.
| Dimensions |
15mm x 20mm x 7mm |
| Recommended Cable | |
| Max Current | 6A |
See the video below for an overview on using Grippa connectors:
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.