*Discount applied at checkout. Online only, excludes bespoke and clearance.
A wall mounted touch switch for single zone control of HaloLED RGBW LED Strip or Lamps. Easy to install as it's completely wire free - it is charged from a standard mini USB socket on the side which provides enough power for several months of use between charges.
The glass fronted finish is clean and elegant and features a touch sensitive dimming slider and a memory for easy recall of a preset dimming level.
Easy to pair to HaloLED receivers - set the receiver to pairing mode and just press POWER ON - that's it. You can use this switch to control multiple HaloLED receivers but remember they will all operate at the same time and in the same way. If you want individual control over each length then you will need a Multi Zone switch.
It's a standard size lamp switch facia plate but it does not need a back box as it can just be stuck into place using double sided pads (supplied) or fixed using screws as the back plate can be separated from the front panel.
Ask a Question
QUESTIONS & ANSWERSAsk a Question
What are the dimensions of this?
The dimensions are 85mm x 85mm x 13mm.
It will fit a standard patress.
The USB point is situated at the right hand corner on the base (below the icon W)
Trust this helps