Seamless PRO10 Top Bending LED | 24V | 5500K
Product description
Specifications
- Wattage : 9w Per Metre
- Lumens per metre : 700
- Colour Temperature : 5500k
- Maximum Single Length : 10m
- CRi : >90
- Dimensions : 10mm x 10mm
- Cut Points : 50mm
- Operating Voltage : 24v
- IP rating IP65
Seamless Pro10 give a continuous, even light along the whole length. No diffuser or aluminium profile is required.
It's only 10mm square with a domed top making it perfect for use in areas where it's visible whilst it's Silicon construction means it's fully protected against moisture or the rigours of cleaning.
It can be inserted into channels or fixed using mounting clips - we supply it to you as a complete unit, cut to length with end caps fitted and sealed and an input cable to your choice of length - please note this product is NOT suitable for home soldering and assembly.
As it has a Silicon coating, it's fully waterproof so can be used indoors or out.
It operates at 24V and a has a maximum single length of 10m, however if you want a longer length we can make this for you but you will need to provide power to both ends
Please choose your mounting option below and then the number of end caps sets and solders/cable you require and then add the required power supply.
Choose Your Mounting.
Sold in 1 metre lengths, the rigid mounting channel is ideal for straight runs allowing you to keep the strip in a constant line.
These mounting clips are ideal for smaller straight runs or runs around corners, we recommend you have a minimum of 3 per metre of strip,
Sold in 1 metre lengths this mounting channel allows perfect fitting for curved radius installations.
You Must Also include:
The end cap set will already be sealed to your strip from our manufacturing facility, one end cap set is required for each continuous strip required.
This charge is for our in house experts to solder the cable to your strip, each strip would require a cable tail (1 solder) any sharp 90 degree corners required will need a cable in between (2 solders)
We can add a cable tail to your strip at any length you wish up to 10 metres, please add the total metres of cable you require for all strips.
Now choose the power supply based on the total length of your strip(s)
This power supply will power up to 10 metres of the Pro10 strip
This power supply will power up to 20 metres of the pro10 strip
This power supply will power up to 30 metres of the pro10 strip
🚚 Next Day Delivery
💪 Commercial Grade
📐 Create Your Own Kit
🤓 Expert Advice
Additional graphics & inspiration





Product ratings & reviews
Typically purchased with
LEDSpace ratings & reviews




Product questions & answers
-
Hi. I have 3 curved steps to light so will need 3 lengths at around 2m and want to put the 3 into 1 transformer. Is this ok to do? Thanks.
Hi, Yes this will be fine as long as the rating of the power supply can support all three lengths, you may need to add in a terminal block or wago connectors as three cables into the terminals on the power supply is quite tight.
General LED Strip FAQ
Popular from this range
Where now?
Product SKU
NS-PRO10-55
Call 02477 395995 or Email support@ledspace.co.uk