LED strip cut and soldering service for a non-waterproof IP20 rated LED strip. This service includes the cutting of the LED strip to size and soldering a cable tail or soldering LED strip to strip where required.
- Soldering wires/cables to the LED strip consists of on 1x solder.
- Soldering LED strip to another LED strip e.g. joining LED strips with cable in between the two runs of LED strip to create corners consists of 2x solders.
TIP: How to order soldering services? If you would like an LED strip run of 4m with a 1m cable tail (cable not included) then you would need to add 1x 5-Core Cable and 1x Solder for RGBW. If you would like to create an 'L' Shape lighting solution for instance, then you would have 1x corner and 1x cable tail so you would need to add 3x Solders for RGBW because each corner requires 2x solders and a cable tail only require 1x solder to connect it all up.
PLEASE NOTE: The price applies to one-sided soldering of a single section of LED strip. Please also provide measurements of your setup in the 'Notes'/'Special Instructions' section in the checkout so we can cut and solder accordingly.
Popular addon services
Being unsure as to what to expect, regarding quality and customer service I was more than happy with both. Good quality and really nice helpful people. I would definitely use LED space again. Thank you for your help.
Good quality compared price for this LED aluminium profile. Will come with plastic diffuser and lateral lid.
Arrived on time and perfect for the job. Competitively priced but postage more than other companies.
Strongly recommend led space
Bought this to use with an ip68 led tape, the extra depth allows you to make a 90 degree bend without having to cut and rejoin the tape, perfect for me as the the render that it sits below is 15mm thick. When I get time I’ll use some frosting spray on the inside of the diffuser to minimise the dot effect of the tape.
Excellent product and service Strongly recommend led space
Good quality product
Good quality product
LEDSpace were most helpful when I first contacted them to ask advice on lighting my Pergola. I am not an electrician so they explained what I would require in layman terms.
The strip lights were cut and sealed to my measurements and were stuck to the Pergola with 3M double sided tape.
The power wires hidden in the drain guttering angled into the roof space (I have a bungalow) attached to the driver (transformer).
I found a wireless switch on the internet so there were no complications with switch wiring.
The Pergola now has a Wow factor.
I had a minor technical hitch which was sorted quickly and efficiently by Shaun at LedSpace.
I would highly recommend LedSpace and their products.
The staff are very helpful and knowledgeable about their products postage was rapid would definitely use again and recommend
Product questions & answers
Call 02477 395995 or Email email@example.com