A power supply for any 24v LED Strip
Seamless : recommended max length 8m
ProStrip : recommended max length 5m
ColourStrip : recommended max length 4m
Adjustable Colour Temperature : recommended max length 5m
Designed for long term reliability and safety, this unit has built in protection against : Open Circuit, Short Circuit, Over Load and Over Heat. These units are not dimmable - if you wish to dim the LED strip then you must place a dimmer on the low voltage side.
The primary/input end is marked with a Live and Neutral terminal to connect to a 200-/240v AC current. The secondary output side has a DC cable for easy assembly to LED Strip. This can easily be removed for a direct connection or to connect to the Cables & Connectors system, use product code LV-CS07.
It is SELV marked and has Class II Protection for protection against electric shock from direct and indirect currents with a fail-safe transformer.
Double insulated and suitable for installation or attachment to furniture with all flammable properties.
I am looking to drive 4x1m strips will one drive do this?
Hi, Yes this is possible, you may require a terminal block as the terminals on the power supply may struggle to receive 4 cables.
I am looking to drive two separate 2m strips of NoSpot Line10 6000K Cool White COB LED Strip Lights from an existing wall switch do I need one or two LED Power Supplies
HI, you can run 2 strips from one power supply no problem, for this I would recommend you use a 75w power supply
Hi, what is the dimensions of the unit?
Please see below dimensions of the unit:
16.5cm x 5.5cm, deepth 3cm.