LED strip cut and soldering service for a non-waterproof IP20 rated LED strip. This service includes the cutting of the LED strip to size and soldering a cable tail or soldering LED strip to strip where required.
- Soldering wires/cables to the LED strip consists of on 1x solder.
- Soldering LED strip to another LED strip e.g. joining LED strips with cable in between the two runs of LED strip to create corners consists of 2x solders.
TIP: How to order soldering services? If you would like an LED strip run of 4m with a 1m cable tail (cable not included) then you would need to add 1x 5-Core Cable and 1x Solder for RGBW. If you would like to create an 'L' Shape lighting solution for instance, then you would have 1x corner and 1x cable tail so you would need to add 3x Solders for RGBW because each corner requires 2x solders and a cable tail only require 1x solder to connect it all up.
PLEASE NOTE: The price applies to one-sided soldering of a single section of LED strip. Please also provide measurements of your setup in the 'Notes'/'Special Instructions' section in the checkout so we can cut and solder accordingly.
Popular addon services
Excellent company get all my led lighting from them. Also excellent technical advice if required
My first delivery was as expected, next day. A second order the following week didn’t arrive for 4 days even though dx said it was out for delivery on the first 2. The driver obviously couldn’t find us as on the third day it was out for delivery then booked back into depot. Delivered on the 4th day by same driver that made first delivery. Maxilux were very helpful with my complaint. No response yet from dx couriers regarding my complaint.
The LED strips (120/m) make for an excellent replacement for the old fluorescent lamps and reduce energy consumption by more than 50 percent whilst allowing for slightly more light output.
Great advice allowing me to install decent LED lights controlled by an app and Alexa
Easy to order, arrived very quickly and well packed. Would recommend.
Excellent pre sales advice. Excellent products and fast and helpful technical after sales advice from the support team. Well done to all at LEDSPACE.
Very efficient people to deal with. Highly recommend them.
My order had a pair of soldered cable tail requirements and it was still shipped the next day, the product feels very well made and looks great, the service was also excellent.
Very helpful on the phone and prompt service
Great design, strong quality trim, easy to install exactly what we wanted.
Used the kit builder to spec my needs which was a great help for a 1st timer. On time delivery of my full order. No issues at all and will be back next time I need.
Good price and easy to install, including by a DIY installer like myself.
Used to light up the plinths of kitchen base units. Very easy to install, whether directly into the lighting circuit or via 3 pin mains plug. Can be cut to length with a pair of scissors and is very easy to join where necessary, eg going past the cooker.
LED lighting can be somewhat tricky to get right, and LED space not only sell products at really competitive prices, but back them up with some of the best purchase support I’ve experienced both before, during and after installation to ensure you get the end result you wanted.
Look great in our bulids
Product questions & answers
Call 02477 395995 or Email firstname.lastname@example.org