Mrs Heaven Home x LEDSpace
Shop Deb’s media wall lighting build
Follow the three-part media wall build from @mrsheavenhome, see how natural white NoSpot LED strip lighting was used, and shop the LEDSpace products to create a similar look at home.
The three-part media wall build
Watch the planning, measurements and final DIY media wall reveal, then use the product links below to recreate the lighting effect.
The media wall starts
A Sunday morning DIY project begins, with the family room media wall taking shape and LEDSpace lighting planned into the design.
Watch part one Part 02Measurements and layout
A closer look at the media wall measurements, TV size and IKEA Eket units used as the base of the project.
Watch part two Part 03The final build reveal
The finished media wall, including LED strip lighting, remote control and Alexa interface from LEDSpace.
Watch part threeCreate Deb’s media wall lighting setup
These are the LEDSpace products used for the media wall lighting setup, including NoSpot Line10 4000K natural white LED strip, power, control and connection accessories.
Seamless8 Natural White | 10W | 24v
The natural white LED strip used to create the clean media wall lighting effect.
Shop / build kit
150w Power Supply 24v
The 24V power supply used to run the LED strip lighting setup.
Shop power supply
Smart Interface - All Strip Types
Adds Alexa-compatible control to the LED strip installation.
Shop Alexa interface
UK Mains Plug Lead White
White UK plug lead for powering the compatible LED driver.
Shop mains lead
Cable Pack - 8mm
Single-colour LED strip cable and connector pack for practical installation needs.
Shop connectors
Remote Control with 4 Zones & 3 Scenes : Single Colour
Remote control for single-colour LED strip, with zones and scene control.
Shop remoteA little Sunday morning DIY
The family room media wall project begins, with LEDSpace lighting planned into the next stage of the build.
Creator note
“A little Sunday morning DIY on our family room media wall. Obviously I couldn’t just have a TV on the wall !!!!”
What this part shows
- The starting point for the family room media wall.
- The project direction before the final lighting finish.
- Why the lighting choice matters in a TV wall or media wall build.
Start with the lighting kit
Use the natural white LED strip lighting kit builder as the practical starting point for a similar project.
Media wall measurements and layout
Deb shares the media wall measurements, including the 75-inch TV reference and the IKEA Eket unit layout.
Build measurements
- 75-inch TV used as the reference point.
- IKEA Eket units: 70cm each x 3.
- Total base unit width referenced: 210cm.
Why this matters for lighting
Media wall lighting needs to be planned around the available runs, access for power and control, and the visual finish you want once the wall panels, shelving and TV are in place.
Useful products for this stage
The finished DIY media wall
The final reveal includes NoSpot Line10 4000K natural white LED strip, control accessories and the finished media wall styling.
Products mentioned in the reveal
Deb references LED strip lights, remote control and Alexa interface from LEDSpace as part of the finished media wall setup.
Shop the LEDSpace setup
Best route for customers
For most customers recreating this look, the simplest route is to start with the natural white LED strip lighting kit builder, then add the control and accessory products needed for the final setup.
Installation note
LED lighting products should be installed by a competent person. Always check product requirements, power supply suitability and installation access before starting your media wall project.