Description
Strip Type: Warm White (3000k)
Colour Temperature: 3000k
Product Dimension: 13mm (w) x 8mm (d) x 2400mm (l)
Wattage: 10W per metre
Operating voltage: 24V
Lumens per metre: 500
LEDs per metre: 300
CRI: >80
PCB width: 8mm
Cut points: 20mm
What's Included:
x1 2.4m BLAQ Aura strip
Enhance your BLAQ Aura setup with the 2.4m Extension Strip, designed to seamlessly integrate with your existing BLAQ Aura system. Whether you're extending the reach of your lighting for larger spaces or adding more depth to your design, this add-on strip offers endless possibilities for customisation.
Perfect for slat wall installs, pelmets, shelves, and dark interiors, it provides the same invisible-by-day, elegant-by-night lighting that defines the BLAQ Aura experience.
Please note: This is an addon product for the BLAQ Aura Starter Kit. You can utilise a max of 4 BLAQ Aura strips per kit.
Customer Reviews
Wow perfect lighting to finish off my project walls
Perfect solution out if all panel lights available.. top quality, easy to set up. Connected to Alexa first time and works! Great packaging too… kit arrives well protected.
Highly recommended
Fitted snug in bought panels ..
Great item and was the perfect finishing touch for our media wall
Did exactly what I wanted it to do
Bought the starter kit plus 2 additional strips. So easy to install, just push into the gaps between the acoustic panels. Practically invisible when switched off. I highly recommend ordering the remote control - one touch on/off and a touch sensitive sliding dimmer. Love it.
Easy to install and looks great
Looks so good and subtle
Excellent quality product. I was hesitant as this is quite expensive and there are cheaper variations available online. But this is so easy to install, no messing around with metal channels and the sticking the strip inside.
This literally pushes into the slat and you can move it over within seconds if you feel the need to.
Over the moon with the BLAQ Aura Slat Wall Lights. Excluding quality, packaged well and easy to install and operate. Almost invisible when turned off and when turned on it gives the wow factor to any room. I’m super fussy and even I was impressed. 😄
Product Q&A
-
Hi do you do the blaq kit in 3m lengths
Unfortunately not, at this present time they only come in 2.4m.
-
Do you get an additional end cap with the extension strip
Yes you get an end cap for each strip purchased.
-
Hi, does that starter pack only support 4 strip lights? If we wanted more than 4 strip lights what do we do?
Yes the starter kit supports 4 strips in total. If you require more you need to then purchase another starter kit and again this will run another 4 strips.
-
If you cut ont strip in half can you use both half’s
Hi,
Unfortunately not once cut then the section left over needs to be disposed of.
-
If I buy the light kit with one extra 3m of led , can I achieve a 2x2 metre and 2x 1 metre ?
Hi,
Unfortunately once cut the remainder needs to be disposed of and can't be reused so to achieve 4 strips you would need a kit and 3 add ons.
-
How long is he cable that goes to the splitter?
Hi,
There is a 300mm cable on the power supply, then the controller and just a small 100mm cable from the controller to the splitter, The cable from the LED strip is 2m long.
-
How long are the cables on each light strip please
Hi,
I can confirm that each cable is 2m.
-
Can they be dimmed and can they be hardwired
Hi,
Yes it can be dimmed as it has a inline dimmer and you could also purchase a remote to do this, and with regards to it being hardwired yes that is also possible.
-
Hi - I am interested in one of your kits for wall panels - do you do these in cold white rather than warm white, please?
Hi,
Currently, the Blaq Aura LED strip is available only in warm white. However, if you prefer cool white, we recommend exploring our other kit options. You can find a suitable cool white alternative here: https://www.ledspace.co.uk/products/x1-warm-white-slat-wall-light-bar-12mm-wide?keyword=slat%20wal