A power supply for any 24v LED Strip including ProStrip, ColourStrip and Adjustable Colour Temperature products.
ProStrip : recommended max length 5m
ColourStrip : recommended max length 4m
Adjustable Colour Temperature : recommended max length 5m
Designed for long term reliability and safety, this unit has built in protection against : Open Circuit, Short Circuit, Over Load and Over Heat. These units are not dimmable - if you wish to dim the LED strip then you must place a dimmer on the low voltage side.
The primary/input end is marked with a Live and Neutral terminal to connect to a 200-/240v AC current. The secondary output side has a DC cable for easy assembly to LED Strip. This can easily be removed for a direct connection or to connect to the Cables & Connectors system, use product code LV-CS07.
It is SELV marked and has Class II Protection for protection against electric shock from direct and indirect currents with a fail-safe transformer.
Double insulated and suitable for installation or attachment to furniture with all flammable properties.
Comes without DC Male Connector Cable.
Being unsure as to what to expect, regarding quality and customer service I was more than happy with both. Good quality and really nice helpful people. I would definitely use LED space again. Thank you for your help.
Good quality compared price for this LED aluminium profile. Will come with plastic diffuser and lateral lid.
Arrived on time and perfect for the job. Competitively priced but postage more than other companies.
Strongly recommend led space
Bought this to use with an ip68 led tape, the extra depth allows you to make a 90 degree bend without having to cut and rejoin the tape, perfect for me as the the render that it sits below is 15mm thick. When I get time I’ll use some frosting spray on the inside of the diffuser to minimise the dot effect of the tape.
Excellent product and service Strongly recommend led space
Good quality product
Good quality product
LEDSpace were most helpful when I first contacted them to ask advice on lighting my Pergola. I am not an electrician so they explained what I would require in layman terms.
The strip lights were cut and sealed to my measurements and were stuck to the Pergola with 3M double sided tape.
The power wires hidden in the drain guttering angled into the roof space (I have a bungalow) attached to the driver (transformer).
I found a wireless switch on the internet so there were no complications with switch wiring.
The Pergola now has a Wow factor.
I had a minor technical hitch which was sorted quickly and efficiently by Shaun at LedSpace.
I would highly recommend LedSpace and their products.
The staff are very helpful and knowledgeable about their products postage was rapid would definitely use again and recommend
Product ratings & reviews
Product questions & answers
I am looking to drive 4x1m strips will one drive do this?
Hi, Yes this is possible, you may require a terminal block as the terminals on the power supply may struggle to receive 4 cables.
I am looking to drive two separate 2m strips of NoSpot Line10 6000K Cool White COB LED Strip Lights from an existing wall switch do I need one or two LED Power Supplies
HI, you can run 2 strips from one power supply no problem, for this I would recommend you use a 75w power supply
General LED Strip FAQ
Popular from this range
Call 02477 395995 or Email email@example.com