Professional Housing & Light Diffusion
- 26.5mm wide rounded corner LED profile
- Ideal for mounting under cabinets & shelving
- Supplied with an opal diffuser & a pair of end caps
- Suitable for LED strip lights up to 20mm wide
This wide corner-mounted LED profile / channel / housing has a 20mm wide internal channel allowing wide or double LED strip lights to be installed for maximum illumination. Constructed from anodised aluminium, this LED profile is ideal for mounting under cabinets and shelving or at wall/ceiling joins.
This aluminium profile can be used with any LED Strip less than 20mm in width including Philips Hue.
Simply screw the profile into place. For installs that will leave the ends of the profile in view, the included plastic end caps allow for a neat finish.
Sold individually in 2m lengths.
Buy Extras & addon services
The Secret to a Professionally Finished Lighting System
Why Choose LEDSpace Profiles?
Outstanding Light Diffusion
Constructed to withstand the rigours of life, our profiles provide an extra layer of defence against potential damage from knocks, splashes, and debris. Plus, they're a breeze to clean. In two years, they'll still be looking as fresh as the day you installed them.
Customisation Made Easy
Your Size, Your Choice
Longer Lengths? No Problem
Need 3, 4, 5 metres or more? With LEDSpace aluminium profiles, extending the length is as easy as pie. Simply butt them together for a seamless finish. For more tips, check out our guide here.
Choosing Your Perfect Profile
When you want a neat finish with minimal prep time, our surface-mounted profiles are your best bet. View more here.
With a versatility that's hard to match, these profiles are ideal for anything from robust floor mounting to embedding in walls and shelves. Explore more here.
Say goodbye to outdated fluorescent tubes. Our suspended profiles can be mounted directly to ceilings or hung from supplied mountings. Discover more here.
Floors, Stairs & Wall
Take a look at all LEDSpace has to offer by viewing all our LED profiles. For that professional finish, check out our profile cutting service. Remember, we're here to help every step of the way, so don't hesitate to reach out for a bespoke quote. You're not just buying a product with LEDSpace - you're investing in quality, durability, and a brand that understands your needs.
Top Selling LED PRofile
Now add some LED Strip
Our Top Selling LED Strip
Purchased two lengths of two meter of the wide corner profile channel with diffusers, went up great with no issues, end caps finished off the job.
Warm white LED’s looks great over the bi-fold door under the soffit/facia boards.
Would recommend and use again
5 star for service from begging to end
I ordered this 2m length for a 2.8m project I was doing because I had some left over from my last project. I was surprised to find that it was slightly different to last years profile. The previous profile had a channel over the full length which enabled pieces to be extended. Luckily I have the wherewithal to modify the new one. Maybe I ordered the wrong profile but I thought I had used the same part number as last year. On mating the two pieces I found that there was a very small dimensional difference on the distance between the diffuser slots. Again easy to fix with a little squeeze where it joins the older piece. The cross section of the diffuser was also very slightly different to that of the older one but hardly noticeable. I am sure that if I had mentioned it LEDspace would have replaced it but I like a challenge and didn't want to wait. The end effect is that it is not noticeable.
The profile itself is high quality. It comes really well packaged and protected
The stainless steel clips are a perfect fit and very thin so if you want it close to a wall the clips are not a problem.
This product is good quality as I expected.
Very impressed with the speed of delivery, quality of the product and ease of fitting. Dramatically improved the lighting effect from a Hue lightstrip when uplighting a ceiling from the back of a tall shelf.
Excellent product, I will carry on using this company
Not installed the product yet but it was fast service and all items were packaged well with no visible damage
It was quite hard to mitre the corners, but that was more due to the house not being square. Can carefully cut the track with a chop saw. To cut the diffuser, cut it 5mm too long then shave 1/2 mm a time with the chopsaw really carefully to size that way it won't snatch. Overall a good result.
Hi, Is it suitable for bathroom please? Regards
Hi, Yes this can be used in the bathroom , but we would recommend that you use an IP65 rated LED strip inside.
Hi, Is the "26mm Wide Corner Aluminium and Diffuser For LED Strip (2m)" dimmable? Regards, Sia
This product is just for the aluminium profile with diffuser, it does not come with the strip, which must be ordered separately, all of our strip is dimmable with the correct controllers, thanks
Hi, I have some led strips that I am looking to put around the ceiling in my shed. I really do not want to be able to see the individual lights. I was thinking of using a tile trim or something like it to be able to position the light to shine onto the ceiling rather that stuck on the wall or ceiling. I have since come across these. Would these do the trick?? It is a 4mx3m building if that makes any difference at all. Thanks
This item would do the trick, it would mount nicely into the corner where the wall meets the ceiling, it would shine light onto both the wall and ceiling and also into the main area of the shed.
Do you have external corners for these or do I just mitre them?
We do not supply corner pieces for the aluminium but the profile can be cut and mitred.
can you extend the 2m profile ie join them to make say 3.5m
The aluminium profile comes as a two metre length but can be butted up or cut down to create longer or shorter lengths.
Has your WIDE ROUNDED CORNER ALUMINIUM PROFILE CHANNEL FOR LED STRIP got a cover, and is it clear? Thank you
Hi, the profile is supplied complete with an opal diffuser and end caps.
Hi, what would you recommend to cut this this product down to size (hack saw maybe?). Thanks
Using a hacksaw is perfectly fine to cut aluminium channels.