Buy 10+ and get 10% Off + Free Delivery
2m ALU75 24.2mm Wide Recessed Plaster-In Aluminium LED Profile Channel + Diffuser LED Strip
📏 Need longer runs of profile? Most of our LED Profiles you can simply butt together.
✂️ Need shorter lengths? Cut by yourself or add our cutting service (leave a note at checkout with required cutting lengths).
➕ Need extra end caps? Extra end caps for ALU75 can be found in the profile accessories section.
- 24.2mm wide recessed plaster-in LED profile
- Perfectly smooth, flush surface finish
- Supplied complete with an opal diffuser
- Suitable for LED strip lights up to 20mm wide
Looking for a perfectly smooth, flush surface finish? Then this recessed plaster-in aluminium LED profile for LED strip is designed to do just that. Screw the profile into place and plaster over the specially designed perforated outer.
Super easy installation:
Supplied complete with an opal diffuser, ready to install. Just add LED strip in the colour you require.
Recommended LED Strip
For Single Colour use a 120 LED Strip for minimal spotting and an even light.
LED strip lights sold separately.
Supplied Complete With End Caps & Mounting Clips (where applicable)
Ideal for use with our non-IP rated & IP65 Splashproof LED Strip
Professional, Durable Finish
Easy To Install
A reliable LED strip lighting system relies on two elements being correct – proper system design and correct installation. If corners are cut then the installation may well work for a while but premature failure or erratic performance is likely.View Details
HaloLED is a cost effective, room level, smart lighting system that allows you to easily control different types of led lighting from one place. Create scenes and zones, mix different types of LED Strip .View Details
Tunable white LED strip light, adjustable colour temperature LED strip or CCT changeable LED tape lights are able to change between different temperatures of white light ranging from very cool white all the way down to very warm white and everything in-between.View Details
QUESTIONS & ANSWERSAsk a Question
Is the diffuser clip in?
Hi, yes, the diffuser clips in from the front face of the profile
hi if longer runs of more than 2m are required you say but up profile , will the diffuser joint not be visible or will it look seemless ..thx raf
Hi, when the pforiles are butted up, it is a good idea to run the diffuser over the join to disguise it, you would then use a smaller diffuser section in a different location butted up to this one.
Hi, would this system be able to replace spotlights and emit enough light?
Hi, Yes this would work for replaceing spotlights and depending on the strip used can easily match or even surpass the light output of spotlights.
Hi do you have a deep plastered in profile preferably 18-20mm deep by 18-20mm wide thanks
Hi, The Plaster in profile here is the laregst we do in the plaster in range, you could use a recessed profile if you require this to be deeper? deep-recessed-aluminium-profile-channel
Could it be use on the floor in between decking boards ? Would it be be resistant enough for being step over, in case is not do you have something similar in size that would
Hello, I would recommend the following product for your decking boards https://www.ledspace.co.uk/collections/stair-led-profiles/products/heavy-duty-floor-aluminium-profile-channel-for-led-strip-2m
Please ensure that you use an IP65 rated strip for this project.
Hi, I am looking the run these on a wall and ceiling total of 25 metres, how do you connect them?
Hi, These profiles simply butt up to each other when installing, there is no requirment for a connector piece.
Do u do plaster in aluminium profiles longer than two metres
Hi, All of our profiles (with the exception of the internal and external corner plaster in profiles) are 2m in length
What is the best way to fix the profile screws or staples
Hi, You can use either for this, although we would usually suggest screwing, thanks ^Shaun
Can these be installed in bathrooms
No problem at all. Building regulation still require that you use an IP65 LED Strip though.
Make sure that the power supply is located outside the bathroom.
Would these be suitable to run a Philips Hue strip in?
Thank you for your message.
Any LED strip (within reason) will fit in our profiles but essentially it comes down to the width of the LED strip that is going to be installed/used so please double check measurments/dimensions before purchasing! Measure and information should be available on the individual product page.
Does the channel come with the defuser
Thank you for your message.
Yes, this profile comes with a diffuser included.
What is the IP rating of this profile?
Hello, the Wide Plaster In LED Profile Channel For LED Strip is IP21 rated. Thanks
Are you able to supply the diffuser in longer lengths than 2m?
All of our diffusers are supplied as two metre lengths.
Hi There Do these have an end cap?
This plaster in profile does not come with end caps.
Do yous have this in 3m lengths?
Our recessed aluminium profile comes in two metres lengths however, they can be cut down or butted up to create longer linear lengths.
Hi I'm looking to put this in a ceiling 2m x 3m sq around a lantern roof do you do corners for this
Hi, I'm afraid we don't stock corner connectors for this LED profile however creating corners is fairly simple. We recommend cutting a mitre using a dropsaw. For best results put the diffuser in place first and cut both together. Hope that helps!
Can you tell me the depth of the channel and external width. Thanks
Hello, we've added a diagram with all the dimensions for this wider plaster profile. The overall depth is 13.8mm and the overall width is 61.5mm.
Royal Shakespeare Company
"When the Royal Shakespeare Company wanted to create a WOW factor stage to celebrate the 400th Birthday of the Bard, they turned to us to create a stunning wall and floor display for the programme which was broadcast live on BBC2."
"Maxilux provided all the LED Strip assemblies for use in their Xmas window displays in 2018 & 2019. LED Tubes were created and then used in all major windows as a centrepiece for the well renowned John Lewis Christmas Displays."