HALO Hub Max - Smart Control Panel with Built in Zigbee Hub

This product requires a 35mm backbox due to the depth of module.

We have spacers available here

This product requires a mains Live and Neutral feed to operate.

Unfrotunately it cannot operate without a neutral connection.

This product designed to provide control other HALO devices - it does not have a switch built in, so it cannot replace your existing light switch by itself. You will need to add either one of our dedicated switch modules, or our in-line mains controller, or LED Controllers

Halo Smart Switch

Halo In-line Mains Dimming Unit

Halo LED Smart Interface

Yes!

HALO can be configured such that any number of sensors or switches can control the same physical device.

At the center of your system is the hub, which handles the connections to and between all other devices, such as sensors, dimmers, controllers and switches. The whole system is set up and controlled by our new Vivoe app.

Here you can set scenes, triggers, automations, and control every element of each connected device, from home or away.

Yes, but the HALO smart system works very differently to a traditional 2/3 way or intermediate switching system.

Within your HALO system, you would have one switch which is physically connected to and controlling the target fixture. Through the Vivoe app, you would then create an integration that synchronises that switch's status with your other smart switches. You can set this up such that any one switch can toggle the status of the target fixture.

Please see this Help Hub guide for in-depth instructions

Not to worry! Our HALO system utilises the Zigbee Communication protocol, which turns every connected device into a 'link' in the chain - so instructions can 'hop' between devices.

If you have no other devices, then we have this handy USB powered Range Extender

You'll need one of our HALO interfaces

Our app is available on the Apple App Store and Google Play Store

Yes! Use the Vivoe app to assign your devices to specifc rooms or locations.

There is an in-depth guide available here

In the unlikely event you need to factory-reset your system, you can do so on a per-device basis through the Vivoe app.

Please refer to your device's instructions.

Unfortunately not, this product is compatible with the HALO Zigbee system only.

This product is covered by a 2 year warranty.

Yes - Add them to your Vivoe app following the setup instuctions for each device, and they will appear alongside your HALO smart devices.

Your HALO system, and all mesh devices will continue to work as if nothing happened - HALO does not rely on an internet connection for anything other than setup and configuration.

You can link your Vivoe app account to Alexa or Google home, following the steps under the 'Me' section of the app.

Use the Vivoe app to set up your devices, scenes and automations.

For more information, follow the guides here

Every device is a little bit different.

Follow the guides here

The possibilities are enless. You can integrate any lighting fixture or appliance into this system, and set up routine or trigger based workflows.

For example: Your smart plug with a TV plugged in can detect when the TV is turned on, and trigger a sequence that dims the lights, pause the music, and so on...