HALO Creating a new Scene

Setting up a new scene

On your HALO System

Once you have your Hub and devices connected, you can start
to set up scenes, in the Vivoe app.

These scenes can either be ‘tap-to-run’ or ‘schedule’ based.

Tap to run -> On
demand, press the button and it will run!

Schedule -> at a specific time, run the scene.

Event based -> “when x happens, run the scene”

To get started, from the home page of the Vivoe app, tap the
plus button in the top right hand corner, then press create new scene.

Select a trigger – such as ‘tap to run’

Tap the plus button to the right of ‘Then’

Select the device you would like to control

Depending on the type of device, you will be presented with
a number of options

On / Off, Brightness, Colour, Mode, Timer

To turn on a single colour light at 50%, you would select
ON/OFF -> On, and Brightness -> 50%.

Tap ‘Next’ in the top right, then ‘Save’ at the bottom, and
give your scene a name, for example:  “Media
wall 50%”

Then press ‘Confirm’ and you are done. That scene should
appear under the scene tab at the bottom of the app.

Tap the ‘manage’ button in the top right, then select the
scene, and add it to the relevant room

The Scene should now be visible on the Hub’s screen.