9m Natural White LED Strip Pack with Multi Zone Switch

The pack contains one 9m length of Seamless8 natural white LED strip, a 150W 24V power supply, a Wi-Fi/RF smart interface, a four-zone single-colour touch-panel wall switch, seven solder-free strip-to-wire connectors and 3m of two-core low-voltage cable, a UK plug with a 2m lead, and installation instructions. Aluminium profiles are sold separately.

This pack produces a fixed 4000K natural white light. It does not change colour or adjust between warm and cool white. Choose an adjustable-white or RGB pack if you need those functions.

Use the included four-zone touch-panel wall switch for switching and dimming. It communicates wirelessly with the supplied Wi-Fi/RF interface. The wall panel itself needs a live and neutral mains feed; it is not a battery-powered stick-on switch.

Yes. The supplied wall panel requires a live and neutral feed and a suitable deep 86mm-square back box. Have a qualified electrician check the existing wiring and fit it. The wireless link is between the panel and the lighting interface; it does not remove the need to power the panel.

Yes. The included Wi-Fi/RF interface works with the free VIVOE/Tuya app and supports Alexa or Google Home integration after setup. Available lighting functions are switching and dimming. A compatible smartphone, home network and any voice-control device are separate from the pack.

No handheld remote is included. This pack includes a touch-panel wall switch and Wi-Fi/RF interface. A compatible RF remote can be purchased and paired separately.

The supplied control supports up to four zones, but this pack includes one lighting interface. Strip sections connected to that one interface operate together. To control additional areas independently, you need additional compatible interfaces and suitably specified power supplies and wiring; splitting the strip alone does not create independent zones.

No. This pack dims the LED strip through its low-voltage interface and uses a non-mains-dimmable power supply. Do not connect that supply to a mains wall dimmer. Use the supplied control method, or choose a pack specifically designed for mains Triac dimming.

A UK plug with a 2m lead is included for a socket-powered installation. The power supply can also form part of a hardwired installation carried out by a qualified electrician. The LED strip operates at 24V DC and must be powered through the supplied power supply, never connected directly to mains electricity. Assembly and connection are required; follow the installation instructions.

Yes. This version of Seamless8 can be cut anywhere along the strip, so you are not restricted to fixed 50mm cut points. Its continuous copper layer has a protective zinc coating. Disconnect the power before cutting and follow the supplied cutting and connection instructions.

Yes. The 9m strip can be divided into shorter sections, with the supplied cable and connectors used to bridge the gaps. You have seven strip-to-wire connectors and 3m of two-core cable, so plan the required connections and cable routes before cutting. Separate branches may require additional suitable distribution terminals. Sections on the same lighting interface operate together; check all cable, connector and control load limits for the layout.

Cut the strip and bridge the corner or gap using lengths of the supplied two-core cable and the strip-to-wire connectors. This avoids forcing a sharp sideways bend into the LED tape. The pack includes seven strip-to-wire connectors; rigid 90-degree corner connectors are not included.

No soldering is needed when using the supplied connectors with this 8mm single-colour strip. The cable pack is designed to make power leads and linking cables using solder-free strip-to-wire connectors. Follow the connector instructions and match the correct polarity; connectors for other strip widths or types are not interchangeable. Mains-side installation work should be carried out by a qualified electrician.

You receive 3m of two-core cable for the low-voltage connections and a separate UK plug lead that is 2m long. The low-voltage cable can be cut to suit the layout. If you need more cable, use suitable compatible two-core cable and have the required length and load checked.

The strip has 3M 300LSE adhesive backing for mounting to a suitable clean, dry surface. Measure and test your layout before removing the protective liner, then fit the strip according to the installation instructions. An aluminium profile can be added if you want a housing for the strip.

Seamless8 uses 480 LEDs per metre to produce a continuous, dot-free line of light without needing a diffuser. An aluminium profile is optional for a housed installation. The strip is 8mm wide; check the profile dimensions and allow space for any connectors. Profiles and diffusers are sold separately.

The strip is rated at 700 lumens per metre, giving a nominal 6,300 lumens over the full 9m length. It produces 4000K natural white light and has a colour rendering index above 90. The light reaching the surface will depend on the installation and any profile or diffuser used.

The strip is rated at a maximum of 9W per metre, so the full 9m length has a maximum strip load of 81W. The pack lists a 150W 24V power supply. The supply wattage describes its capacity, not continuous energy consumption.

This 9m pack exceeds the strip's 8m maximum run when powered from one end. Use a centre feed or separate feeds so no run from a feed exceeds 8m. Power-supply, interface, cable and connector ratings must all suit the load; additional feeds do not increase the capacity of a power supply or interface. The supplied strip-to-wire connectors are rated at 3A (72W at 24V), so do not route the full 81W maximum strip load through one connector. The interface is specified at 3A per output channel; ask LEDSpace to confirm the output arrangement for this 9m pack before installation.

Contact LEDSpace before extending this pack. The power supply, lighting interface, cable and connectors must all be sized for the total load, and each strip run must remain within the 8m single-end feed limit. Extra strip may need additional power feeds or different components. Choose a pack sized for your final installation rather than assuming the included supply can power more strip.

This pack is intended for dry indoor use and is not a waterproof lighting system. Keep the strip, connections, controls and power supply away from water and damp conditions. For outdoor or wet locations, contact LEDSpace to select a suitably rated complete system.

Each individual component in this pack is covered by a five-year warranty. Keep your order details and contact LEDSpace if you need help with a fault or a warranty claim.