Use a restrained line of light to bring the shape of the house into the evening view.
Soffit and eaves lighting can make an elevation feel more resolved after dark. The best starting point is the intended view: a gentle accent beneath the roof, light on a wall or a distinct line along the building. Decide that effect first, then coordinate the strip and mounting detail with the roof’s existing construction.
Explore related outdoor lighting ideas. These concepts illustrate design possibilities, not a verified installation, specified product or exact colour output.
Bring the idea back to your own dimensions, mounting surface and exposure conditions.
Shop LED strip lightsBring the light position, mounting, weather exposure and complete electrical system into one installation brief.
Test the proposed position from the garden, pavement and windows that look towards it. Deep soffits and shallow eaves create different viewing angles, so a detail that looks discreet up close may be prominent from a distance. Keep the light directed towards the intended surface and consider nearby bedrooms. A short trial can help establish whether the effect suits the façade before a long run is installed.
Break the roofline into separate elevations and note returns, corners, downpipes and interruptions. Mark cable entries and an accessible location for power equipment. Confirm the strip’s permitted lengths, bend direction and end-cap allowance before the mounting route is prepared. Plan safe installation and future replacement access at the outset, particularly where conservatories, extensions or planting limit access beneath the eaves.
Soffits are part of the building envelope. A qualified installer should coordinate the mounting with the roof detail, leaving ventilation and drainage features unobstructed. Assess wind-driven rain and condensation rather than assuming the eaves stay dry. Each joint, cable entry, control and power supply needs protection suited to its location, and the complete arrangement must follow manufacturer limits. Keep maintenance points accessible after the work is finished.
Explore white-light and colour options, then have a qualified installer confirm the selected products and every connection for the actual location.
A fixed warm-white appearance for the selected lighting detail. Test it against the actual outdoor surface.
View sealed warm-white stripChange the white tone with compatible CCT controls. For a natural or cool-white appearance, check the selected product’s available range.
View sealed CCT stripThe linked RGBW option offers colour plus a separate white channel. It needs matching RGBW controls and a suitable complete installation.
View sealed RGBW stripRGB and RGBW use different control arrangements. The colour product linked here is RGBW, with its own white channel; an ordinary indoor RGB strip is not an automatic substitute.
Swatches are illustrative, not product photographs or exact colour temperatures. Screens and surfaces change how light appears. Available tones and suitability vary by product. The strip’s rating does not establish the protection of the whole system.
These sealed strip options are starting points for an installer-assessed system. The strip rating alone does not establish location suitability or protect its connections, controls and power equipment.
A fixed warm-white option for a deliberate line beneath an approved roof detail.Installer approval is needed for exposure, fixings and roof ventilation. Allow safe access for maintenance.
View product
Adjustable white allows the roofline accent to be compared with the building’s other white lighting.Requires compatible CCT equipment. Confirm protected cable routes and accessible power supplies before installing at height.
View product
A colour-capable roofline accent for a carefully controlled architectural scheme.Use compatible RGBW controls and assess light spill. The strip rating alone does not establish the weather protection of the complete system.
View productThese are individual strips, not a complete outdoor lighting kit or a checked bill of materials. Confirm mounting, power, controls, cables, connections and exposure limits together. SPLASH12 must remain outside water and is not a walkover or driveover lighting system. Product imagery does not identify the products used in the concepts.
A linear strip can provide an architectural accent, but its contribution to usable illumination depends on the position, surfaces and output. Plan entrance, access and other required lighting separately rather than assuming a roofline accent will cover every need.
Only if the building detail and product requirements allow it. The location must preserve roof ventilation and drainage, accommodate approved fixings and cable entries, and remain accessible for maintenance.
No. Wind-driven rain and condensation can still matter. Ask a qualified installer to assess the location and specify protection for the entire system, including connections and power equipment.
Plan each elevation and corner before choosing the electrical layout. Long distances, changes of direction and cable routes may require separate runs or feeds within the chosen product’s limits.
Use the existing quote form to share your ideas and the details of your space.